PCM Driver™ electric driveheads with disk brake systems
PCM Driver™ B-50 and B-100 key differentiating factors are the following: innovative belt guard, sliding motor base plate, disk brake and environmental seals for standard and high temperature applications.
Our driveheads comply with ISO 15136-2 surface Drive System requirements.
PCM Driver™ with disk brake system (B-50 & B-100 models) are CE certified to guarantee maximum safety.
All PCM Driver™ B-50 and B-100 feature a high quality Brembo™ disk brake as standard equipment.
PCM Driver™ B-50
Belt Driven 50 HP with disk brake system
Key features & benefits:
- Sliding light cover
- Easy alignment belts and pulleys
- Rotating part fully protected
- Low maintenance requirement
- Associated service and technical support
Specifications:
- 50HP ( 37KW)
- 1 062 lb.ft (1 440 Nm)
- L10 at 9.5T: 25 000 hours at 500 RPM
- Ca90: 39 000lbs ; ISO Ca: 670 kN
- PR 1 ¼” or 1 ½”
PCM Driver™ B-100
Belt Driven 100 HP with disk brake system.
Key features & benefits:
- Sliding light cover
- Easy alignment belts and pulleys
- Rotating part fully protected
- Low maintenance requirement
- Associated service and technical support
Specifications:
- 100HP (75KW)
- 1 800 lb.ft (2 440Nm)
- L10 at 13.7T: 25 000 hours at 500 RPM
- Ca90: 57 000lbs, ISO Ca: 980 kN
- PR 1 ¼” or 1 ½”